|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: do you have anything to raise up a 96 katana 600 to make the tail look higher? |
| ANSWER: no |
|
| QUESTION: do you have pegs for a 08 gsxr 600 front and back? |
| ANSWER: front yes... back no |
|
| QUESTION: will a hayabusa swingarm fit a 98 katana 750 |
| ANSWER: doubt it |
|
| QUESTION: Will these pegs fit a 92 gsxf 600 katana, and if so are the blue pegs like a dark blue or lighter blue color. |
| ANSWER: yes...... Standard anodised blue. (med blue) |
|
| QUESTION: do you have rear foot pegs for a 94 Suzuki 750 Katana |
| ANSWER: front and rear pegs are the same on this model... |
|
| QUESTION: do you have rear footpeg brackets for 2007 hayabusa with no hole for exhust bracket |
| ANSWER: no |
|
| QUESTION: Just wondering if these and the passenger pegs will fit a 2008 Busa ? thanks |
| ANSWER: yes. |
|
| QUESTION: I have a 2007 gsx-r600. I want pegs for front and back (passenger). Which do i need for each? Are they the same? |
| ANSWER: Front would be # 2GPS4-......and rear is # 2GPS1- |
|
| QUESTION: What models are compatible with this item? |
| ANSWER: contact comp werkes |
|
| QUESTION: Do u know where i can get aftermarket parts for a 2006 GS500F |
| ANSWER: no ideas |
|
| QUESTION: do you have a lowering kit to fit a 95 katana 600? is there another year that will fit that year also or do i need to get the wholeswing arm off a 98 katana |
| ANSWER: |
|
| QUESTION: Does anyone make frame sliders for a 97 gsx600f katana? |
| ANSWER: doubt it..... |
|
| QUESTION: Are you sure that I will need 2gps4 for the front? because I looked around at a lot of sites and your site does not list the pegs by their numbers "2gps4" when I looked at parts unlimited I found 1GPS1-S FITS MODEL: GSX-R750 88-06, COLOR: SILVER - RIDER $49.95.
This should fit my bike so if you could explain what you mean by 2gps4, do you mean that if I select the suzuki rider gp pegs it should fit? I am sorry but I need a longer explanation!
Thank you! |
| ANSWER: Suzuki has changed their pegs...... The 2GPS4- and the 1GPS1- are basically the same peg. Difference being the pin size. The newer GSXR's have a smaller pin than the older ones. Changed around 04.... |
|
| QUESTION: Will these fit my 07 750 GSXR? You mentioned that you where not sure if they would fit the 06, and they are virtually the same bike? |
| ANSWER: For the front you need 2gps4-color |
|
| QUESTION: ARE THESE PEGS STRONGER THAN THE STOCK PEG I MEAN IN STUNING AND HAVING TO PUT ALL MY WEIGHT ON THEM???? |
| ANSWER: Good question.... they're made from billet alum. So they are very strong, however they were designed to lighten the bike. Hence, a lot of the material was removed. All I can say is the are AS strong as stock. |
|
| QUESTION: are the rider and passenger pegs chrome? if not can you provide a source where i can get them chrome, also the peg brackets chrome for an 07 gsxr 750? |
| ANSWER: High polished ....... |
|
| QUESTION: I have a 2001 Katana 750, are the GP pegs the same length as the stock? How log are the GP pegs for this bike?
How do I install them? |
| ANSWER: There very close in length... they're just alot thinner and are slash cut (no feeler peg).... You pull the stock pin, remove peg.... insert new peg and stock pin. |
|
| QUESTION: will the front pegs also fit the rear for a 2005 GSX Katana? |
| ANSWER: thats what suzuki says |
|
| QUESTION: : what ones fit 2007 600 gsxr |
| ANSWER: 2GPS4- color |
|
| QUESTION: what ones fit 2007 600 |
| ANSWER: 600????? katana, gsxr, ???? |
|
| QUESTION: how much shorter are these pegs from a stock '07 gsxr600 |
| ANSWER: Don't know..... don't have the stock pegs.... |
|
| QUESTION: DO YOU HAVE FOOT PEGS TO FIT 1996 GSXR1100 ? (rider)
AND DO YOU NO WHERE TO GET PIPES AND FAIRING ? |
| ANSWER: no, sorry |
|
| QUESTION: can you use the stock braket with the front pegs on a 95 gsxr 750, sorry if it sounds stupid but want to make sure. Thanks |
| ANSWER: yes |
|
| QUESTION: will the GP pegs fit on an 2006 Katana 600 |
| ANSWER: yes |
|
| QUESTION: Do you have a picture of this product? |
| ANSWER: just the photos on the site....a few pages back |
|
| QUESTION: So if they are typically shorter than stock pegs just how long are the GP pegs - for the Hayabusa specifically? |
| ANSWER: 2.875 inches of surface |
|
| QUESTION: Do you carry or produce 2006/07 GSXR 750 GP Pegs? Also, is all of the colors available for this model? Thanks.. |
| ANSWER: yes, and yes |
|
| QUESTION: DO YOU HAVE ANYTHIN FOR A GSX 1100 78 |
| ANSWER: Sorry. |
|
| QUESTION: Do you have any pegs that fight an 89 GSXR-750 (Passenger)? |
| ANSWER: Yes...... 2GPS1-Color |
|
| QUESTION: Do these pegs include brackets? If not do you have any idea where I can get them? |
| ANSWER: No..... call an OEM dealer |
|
| QUESTION: do you have gp pegs(rider)for a 2007 suzuki gsxr? |
| ANSWER: Supposed to be the same as 06... So, YES! |
|
| QUESTION: Do you have the rear passenger foot pegs for a 94 gsx katana 750? |
| ANSWER: Should be the same peg front and rear. You may want to look at your mounts to verify this. |
|
| QUESTION: when do u plan on getting pegs for the '07 GSXR600??? |
| ANSWER: Have them for the front.......rears are a few months out. |
|
| QUESTION: Would any of the pegs listed above fit a GSXR 1100 J (88 model)?
Also do you ship to Australia? |
| ANSWER: call comp werkes.... |
|
| QUESTION: Which of these peg sets might fit a GSF 400 Bandit? I need to purchase front and rear pegs. |
| ANSWER: have no idea.... |
|
| QUESTION: The purple and gold footpegs that you sell for the Suzuki RF900 94-97, how close are the purple and gold footpeg colors to the purple and yellow colors on the '96 Suzuki RF900? I'm trying to find as close of a match as possible and I'm thinking the purple would be closer than the gold (to the yellow). Also, do these come with the hardware (pins, etc) or just the footpegs? And what is your return policy? |
| ANSWER: Purple will be closer....use stock hardware. Standard 20% restock |
|
| QUESTION: do they make frame sliders for the 95 GSX600F katana? |
| ANSWER: |
|
| QUESTION: I'm looking at these questions and at the VERY VISIBLE list at the top. My question is why isn't anyone reading the damn list before asking these idiotic questions?! |
| ANSWER: nothing better to do I guess...... |
|
| QUESTION: Hello there, do you folks carry the Blue anodized pegs for a DRZ400? Thank you Simon |
| ANSWER: no |
|
| QUESTION: will these fit a 86 gsxr 1100 front and/or rear?
Or even with slight modification? |
| ANSWER: probably.......... |
|
| QUESTION: well this fit the 06 gsxr 600 |
| ANSWER: Front Yes |
|
| QUESTION: Do you have a footpeg lowering kit for a k3 sv650s. if so how much lower will the footpegs be.
Thanks Kev |
| ANSWER: Try Lockhart/Phillips 360 pegs |
|
| QUESTION: Is it $49.95 per peg or per set?
When asked "How many" is it for sets or singles? |
| ANSWER: per pair.........that is right and left |
|
| QUESTION: Will the 05 set fit the 06 GSXR1000 and do you have them for front and rear? |
| ANSWER: nothing for the rear.... |
|
| QUESTION: Will these pegs fit a 2001 katana 750
in the front and back . |
| ANSWER: front.... |
|
| QUESTION: I bought a set of these locally for my 99 gsxf katana 600 for the front and they fit so loose they would just flop all over and no place to put the spring tesion in it. did I install them wrong or what? I thought you just pull the pin and put the new set in. the part # was gps2 in black. They had an easy 1/4 inch room to spare in the braket and the hole for the pin was twice the size as the pin. please help. |
| ANSWER: You need to take the sleeve out of the stock peg and insert it into the new ones. |
|
| QUESTION: will these fit a 2001 katana GSX 600F?
will these fit a 2005 GSX-R750? |
| ANSWER: we have pegs for both |
|
| QUESTION: Will the Suzuki GSXR1000 01-04 fit the 2005? |
| ANSWER: no |
|
| QUESTION: will these fit the 06 gixxer 600 now? |
| ANSWER: yes |
|
| QUESTION: can i lower my footpeg height on 2003 sv1000? |
| ANSWER: You need a rear set....Try Gilles. |
|
| QUESTION: do your pegs fit gsx600f (90/91)model in red or silver front and rear |
| ANSWER: Yes |
|
| QUESTION: Do you have pegs for an '06 GSXR 750? |
| ANSWER: we think the 05 pegs will fit but we won't know for sure until we get a bike, hopefully in the next couple of weeks.thanks. |
|
| QUESTION: Where can i find parts for a 2004 Suzuki GS500F |
| ANSWER: There's not much if anything available. Sorry.... |
|
| QUESTION: Will These Fit 2006 GSX600F Katana |
| ANSWER: yes |
|
| QUESTION: Will these fit the 2006 hayabusa? |
| ANSWER: yes |
|
| QUESTION: Will these pegs fit the 2001 katana .[front ] |
| ANSWER: yes |
|
| QUESTION: Are these pegs any longer than stock?.. I wear a size 14 boot, and could use a little more foot maneuvering room on my '97 gsxr 600. |
| ANSWER: No, If anything they're shorter. |
|
| QUESTION: Does ordering 1 count as ordering a set (left and right pegs) or just one side ? |
| ANSWER: sold in pairs. (right and left) |
|
| QUESTION: will these fit a 2005 suzuki sv650s? |
| ANSWER: yes |
|
| QUESTION: Do you have any footpegs that will fit my 1995 Suzuki RF600? |
| ANSWER: yes check the list |
|
| QUESTION: do u have foot pegs for a 05 GSXR 600 |
| ANSWER: Yes same as the 03-04 |
|
| QUESTION: do you have pegs to fet 86 gsxr750
|
| ANSWER: I only show back to 93 |
|
| QUESTION: will these fit a 2003 suzuki katana gsx600f ? |
| ANSWER: yes |
|
| QUESTION: Do you have any foot pegs with LED? |
| ANSWER: no |
|
| QUESTION: do you have any pegs that will fit an 05 Suzuki GS500F |
| ANSWER: No |
|
| QUESTION: will these fit fit on A 2005 sv1000s? |
| ANSWER: yes |
|
| QUESTION: Do you have a footpeg that will fit a Buell XB9S? |
| ANSWER: no |
|
| QUESTION: is the blue color a dark blue to match a gsxr 750 04? |
| ANSWER: Its a bright anodized blue. Not a navy blue. |
|
| QUESTION: Will the 03 GP pegs work on an 04 Katana? |
| ANSWER: Yes, The front will. The back????? |
|
| QUESTION: will these fit an 04' gsxr 600? If not do you have some that will? |
| ANSWER: yes, just make sure we know the year and model. we'll get you the right pegs. |
|
| QUESTION: will the gp pegs use the original parts on the bike or am i going to have to buy something else to put them on. The bike is a suzuki katana 99 |
| ANSWER: With the Katana The front will work fine. The rear of the Katana's are very inconsistant varies. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|