|
| Hotbodies Racing SUZUKI GSX-R 1000 (05-06) SLASH CUT MEGAPHONE SIDE MOUNT EXHAUST |
Hotbodies' NEW Slash Cut Megaphone for the GSX-R 1000 (05-06) gives you the MotoGP inspired look of the NEW GSX-R 600/750. The megaphone includes a perforated core to reduce dB levels, all you can see is the megaphone exiting the right side top edge of the bodywork. This slip-on kit can be installed in under an hour using the tool kit. We recommend getting the bike re-jetted to achieve maximum power gains. Combine this with the Hotbodies Undertail and Hugger for the best look on the street.
INCLUDES:
Polished stainless Steel Megaphone w/Baffel
All Heat Shielding
All Mounting Hardware
Instructions w/ Photos |
| |
| This item usually takes about 1 to 2 days to ship |
| |
| Item no.S05GS-XSO |
Retail: $199.95(PLUS shipping) |
| Today$199.95 |
|
|
|
|
| Application Chart |
Diagrams |
Application
Notes |
|
| 2005 Suzuki GSX-R 1000 (K5) |
|
|
| 2006 Suzuki GSX-R 1000 (K6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: how long is this exhaust and size of mounting clamp to header.... |
| ANSWER: The exhaust is about 6-8 inches I don’t have themeasurement of the header size all I have is the clamp size we use. |
|
| QUESTION: I have a '03 gsx-r1000 and I'm thinking bout buying '05-'06 slash megaphone exhaust for a gsx-r1000 will the '05-'06 fit the '03? |
| ANSWER: It will fit on your bike but you will have to cut your header.
|
|
| QUESTION: yes i have a 2009 gsxr 600 i just bought a slash cut megaphone from hotbodies. by puttin this pipe on do i get alittle back pressure back bc i want to keep a little of my torque or it really want kill my torque that bad |
| ANSWER: You will still have your torque from this exhaust. |
|
| QUESTION: hello their i have a 2003 gsxr 600 just purchased
05-06 gsxr 1000 headers would your dual slash cut slip on fit on this system if yes.
how much would shipping be to the united kingdom many thanks josh. |
| ANSWER: If you bought the 05-06 GSX-R1000 headers then yes part # S05GS-XSO or S05GS-XSO-BLK depends on your choice of color would bolt onto the header. The only thing that might be different is the mounting point which holds the exhaust on so I would double check that.
Please order online. The shopping cart will calculate the shipping cost for your review at checkout. |
|
| QUESTION: do they make a side mount exhaust for 2005 gsxr 600 20th anniversary edition?? |
| ANSWER: Sorry, but we do not make a megaphone for that bike. You can buy a 05-06 GSX-R1000 but you will have to modify it. |
|
| QUESTION: what are the modifications that will have to be done to a 2000 CBR 929 so i place a megaphone on my bike |
| ANSWER: I have no idea as we do not test fit these exhaust on different model bikes. |
|
| QUESTION: do you guys make this exhaust to fit a 01-02 gsxr 1000 |
| ANSWER: Sorry, we do not make one for that bike but I have seen customers buy part # S05GS-XSO and retro fit it to that bike. |
|
| QUESTION: can i custom fit a megaphone exhaust on a 2002 750 gsxr and will i gain in hp |
| ANSWER: Yes, you can modify these to fit on your bike. You will gain anywhere from 2-5 HP. |
|
| QUESTION: I recently perchased an 06' Gsxr-1000. I'm now trying to compare exhaust systems and slip ons. Which would you prefer for both increased sound and power.. I came across this forum by chance and am diggin the slash cut pipe., but how does it hold against Yoshi or V&H?? Thanks |
| ANSWER: If you are trying to compare exhaust kits it's honestly just personal choice based of sound. |
|
| QUESTION: is there anyway to fit the exhaust on a 07 sv 650 |
| ANSWER: This exhaust will not work on your bike but I have seen customers buy part # S05GS-XSO and modify there bike to make it work just honestly not sure how they did it. Try searching on some forums. |
|
| QUESTION: Do you have the Racefit "Growler" slash cut for a 2007 GSXR 1000. How do you go from the factory two pipes to just one with the slash cut. |
| ANSWER: As of right now we do not make a MGP exhaust for the 2007 GSX-R1000. We only carry the dual megaphone exhaust part # S07GS-XSO. |
|
| QUESTION: i have a 06 gsxr 1000 and want the slash cut megaphone but do not want to loose HP. i want to know after getting the exhaust and a power comander. can i get the same sort of power i alredy got or more? |
| ANSWER: Yes you will gain some HP with this slip on kit |
|
| QUESTION: do i need to remove my cat for this exhaust. I have a gsxr k7 ... if so what will i need for it to work |
| ANSWER: Yes, your stock Cat is built into to your stock exhaust so it will be removed. |
|
| QUESTION: i have a 04 gsxr 600 and was wondering if this would fit |
| ANSWER: I have seen customers buy this exhaust to make it work on your bike just honestly not sure what is involved try searching some forums.
|
|
| QUESTION: I have a 2005 hayabusa and saw your undertail exhaust kits in an advertisement, do you make one for my bike? |
| ANSWER: Sorry but we do not make a exhaust like that for your bike but you can most likely buy a 08 Busa megaphone exhaust and modify it to fit on your bike.
|
|
| QUESTION: hey guys, i have a gsxr1000 K6 and i am after something like the SLASH CUT MEGAPHONE SIDE MOUNT EXHAUST but i want it to have dual pipes like the K7 after market exhausts on the is link:
www.jardineproducts.com/products/productID/720
I currently have a titanium Yoshi on it, its kind of loud but very tinni sound compared to the K7 with that muffler i sent on that link. do you have anything that sounds and looks like that pipe for K6? Cheers Guys... |
| ANSWER: Sorry but we do not make a megaphone with dual can’s for that bike.
|
|
| QUESTION: i try to eliminate the botterfly muffler on suzuki grsx 750 2007 but now the bite do not turn on ...the had red ligh f1 |
| ANSWER: The bike should still turn on. The butterfly cable has nothing to do with the motor. All that butterfly valve does is emissions for air. Double check everything again.
|
|
| QUESTION: I have a 2007 Gsxr 1000 with the hotbodies slip on. which is exhaust out of both side. If i eliminate the CAT with a Y-pipe, are there sensors in the CAT that will effect the bikes performance once i did away with them??? thank you for your time! Mike |
| ANSWER: No by removing those cables it will not affect performance on the bike. You will gain HP From adding this slip on kit.
|
|
| QUESTION: I have a 2007 gsxr 1000. I want to eliminate the CAT. I know Hotbodies makes a exhaust for mine but will mount to the CAT..
Question: Will the 05-07 hotbodies exahaust fit my 07 gsxr 1000 & eliminate the cat?
Nick
moanicktaylor@aol.com |
| ANSWER: The 05 Gsx-r megaphone should work on the 07-08 model but only problem is the 05-06 gsxr is a single exhaust so you would have to buy older headers and get rid of the dual canister look.
|
|
| QUESTION: I have a 01 GSXR1000. Will this pipe fit my bike |
| ANSWER: This pipe will fit but you will have to modify your exhaust to make this fit. Try searching for some info on forums
|
|
| QUESTION: how is the sound of the exhaust. if there is on youtube, kindly send me. are you shipping it to Bahrain, kindly let me know.
thanks
Ali |
| ANSWER: The sound of this exhaust is on the louder side because of the size of canister but it does have a baffle so sounds really good.
|
|
| QUESTION: I read this won't fit an SV650...however, can you provide me with the inlet size? I'm sure it will fit, it's just a matter of using a correct midpipe? |
| ANSWER: I don’t have the exact ID on the pipe but its in between 1.65 & 1.81
|
|
| QUESTION: hey there, i have put a megaphone exhaust on my gix 1000 k6, love the pipe but it pops sometimes when i back off the throttle in high rpm, that means my bike is running to rich doesnt it? what can i do to make this stop? thank you. |
| ANSWER: If you want to adjust the fuel I am pretty sure the only way to do that is with a power commander. |
|
| QUESTION: i have an 04 gsx r 600 if i put 05 1000 cc headers with this slip on work or is there an easier way?? |
| ANSWER: You can put the megaphone on with your headers, just try searching some forums for some info. |
|
| QUESTION: I've a Suzuki Gsx-R 1000 '03. I want to unplug the wire of the exhaust valve. Which color of wire do I have to cut? |
| ANSWER: Please check with a certified mechanic in your area. |
|
| QUESTION: so i will gain more power if i get this pipe with out doing anything futher, is that correct? and if i did want more power for my gsxr1000k6 would i be able to put a power commander in myself and not have to do anything else e.g put in on a dyno. thanks cliffy. |
| ANSWER: Yes that is correct. |
|
| QUESTION: I have a 2003 gsxr 600 and would like to custom fit this exhaust so can you tell me the diameter of the fitted end? Also, is it street legal exhaust due to loudness? Thanks |
| ANSWER: The part that bolts up to the headers is about 2 inches. As for being street legal you would have to check with your local DMV.
|
|
| QUESTION: dose the pipe for the 06gsxr work on the 08gsxr |
| ANSWER: No it will not work on the 08 model GSX-R we do make a megaphone for the 08 600/750 part # you need is 60801-2100
|
|
| QUESTION: Will you put out an undertail exhaust for the gsxr 1000 2006? |
| ANSWER: Sorry but we do not make a undertail exhaust kit for this bike |
|
| QUESTION: I wanted to use this exhaust in a custom application, but wanted to know if there was any physical difference between this megaphone for the 05-06 GSXR and the 08 Busa besides the pick up points? Do you have the measurements of them, length, etc? Are the baffles used any different for the bigger bikes? Any help would be appreciated. Thanks. |
| ANSWER: The 08 Busa ID is a bit smaller than the S05GS-XSO.
|
|
| QUESTION: would this pipe fit on a 05 gsx-r 750? if not how come? |
| ANSWER: Yes this pipe can fit onto that bike but honestly not sure what you would have to modify. Try searching for a forum for more info.
|
|
| QUESTION: Is there a way to reduce the db for this exhaust down to the 92db maximum limit for Laguna Seca? |
| ANSWER: Sorry but we can’t add anything else to this exhaust to make it to that DB rating.
|
|
| QUESTION: i have a cbr 929 with a micron serpent system on it now and want to keep my headers and midpipe but want the look of the slashcut megaphone i was wondering what size the inlet was on the megaphone mine is 2 and one quarter inches o.d. please get back a.s.a.p. thank you |
| ANSWER: The ID on these slash cuts are about 2 inches. |
|
| QUESTION: Back to the black and brown wires. I took off the Orane Cap trying to unplug the Black and Brown wire but it was the could you be alittle more specific. As the grey plug sit in the ECU there are two black and brown wires one on top and one offset on the bottom. which wire do I unplug. Neither on are "eighth (8th) wire". The one on top is the 9th and the other is the 11th. |
| ANSWER: Go to www.gixxer.com it’s a Suzuki forum that would be the best place to check. |
|
| QUESTION: i heard a bike with this pipe and it was extremely loud. i was wondering if the baffle is removable and might have been the cause, to make a louder sound. And if so will it lose a lot of power. |
| ANSWER: The baffle is welded in this exhaust. |
|
| QUESTION: hi will this fit a 2002 gsxr 1000nchers |
| ANSWER: Im sure you can make it fit but it would be a custom thing.
|
|
| QUESTION: how much for this product in New Zealand dollars and what would shipping be please? |
| ANSWER: we ship to New Zealand for an additional amount ranging between $25-75 depending on total weight, insurance and delivery time. Once you place the order (just go through the online process) we will charge your account the additional amount. Also note we do not ship international orders everyday, currently we send out about once a week. Therefore, add an additional 5 business days for processing when determining delivery timeframe. |
|
| QUESTION: will this slash cut exhaust fit the 04 gsxr 1000 |
| ANSWER: Major modifications would be required. We do not recommend this installation. |
|
| QUESTION: which kit did that person use to run the twin set up for the hayabusa? |
| ANSWER: This kit, because it has the baffle. Not sure what they did to make it fit.
|
|
| QUESTION: Do you have a short exhaust like this one that will fit the SV?
|
| ANSWER: Sorry, but we do not make one like this for the SV650/1000.
|
|
| QUESTION: Will it fit an 02 SV 650S. |
| ANSWER: No, it will not fit the SV.
|
|
| QUESTION: Hi, there are 3 different tips in your pictures. I would like to order the tip shown in the 1st of the 3 smaller pictures located right under the appliation chart. What would the part number be for that? Do you have it in stock? |
| ANSWER: They are the same pipe just different sides of the bike |
|
| QUESTION: I have a slip on Yoshimura on my bike now. Are there any additional modifications to make in order to mount this pipe? Is this pipe louder than a Yosh? |
| ANSWER: Yes, this pipe is louder then a yoshi. Also I am not sure if you would have to modify your after market exhaust to fit this. This was made to fit with stock headers.
|
|
| QUESTION: Everyone seems to be talking about how loud this pipe is? Are the db levels safe, because at 105 and higher you can loose some hearing. The pipe looks great. |
| ANSWER: There is no DB rating for this exhaust.
|
|
| QUESTION: Can I get a twin megaphone exhaust for my 06 GSX1300R Hayabusa? Does it only come in chrome? |
| ANSWER: We do not make a megaphone exhaust for the busa, but we have seen people buy two of these kits and make them fit on the busa which looks great. They only come in chrome.
|
|
| QUESTION: What is the db levels of the slash cut mega exhaust?
Is it around 105 db's? Will I need to wear ear plugs? |
| ANSWER: Hotbodies does not have the exact DB rating of the exhaust but it sounds just like any other after market exhaust. |
|
| QUESTION: What is the F.I. light and why would it need to be unplugged? |
| ANSWER: The FI light is a emission control which reads air & fuel mixture. If you don't unplug it, the light will be on constantly on your gauge cluster. |
|
| QUESTION: on your question and answer board you mention disconnecting wires from the ECU to remove the FI light. Is this totally safe? And for long periods of time? |
| ANSWER: Yes, it safe. All you arer doing by disconnecting those wires is by-passing the FI light. |
|
| QUESTION: if i leave my f.i. light on will will my bike start to mess up w/ your exhaust? |
| ANSWER: No, it will not mess up your bike. If you decide to get a power commander that will remove the FI light.
|
|
| QUESTION: everyone keeps asking if it is safe for the bike and if my bike has lost any power. and it has started to worry me. is this exhaust safe for my bike and will i be able to keep this on my bike for a long time without having nothing to worry about? |
| ANSWER: Yes, that exhaust is the same as other exhaust kits.
|
|
| QUESTION: i read that this slash cut exhaust sounds like you were crusin' your bike without a slip on, is that so? |
| ANSWER: this exhaust has a after market sound to it. |
|
| QUESTION: is the exhaust louded then stock. i can't stand how quiet stock is and do i have to cut any thing to put it on.. |
| ANSWER: Yes, this exhaust as an after market sound to it. Louder then stock.
|
|
| QUESTION: why are you telling me i might have to re-jett a 05-06 GSXR-1000 when the bike is fuel injection? Also at the same time you are saying that you do not need power comander. Well hello if the exhaust needs to be adjusted a power comander is the only way with a new map installed. Am i right or am i wrong please respond. you say it does not lose any power well is there any gain in power. |
| ANSWER: You do not need a power commander but if you want the Full potential HP out of the exhaust it would be best to install a power commander - its really up to you. |
|
| QUESTION: Does this megaphone exhaust fit the 07 gsxr 600 also |
| ANSWER: No, it will not fit on the 07 GSXR600. |
|
| QUESTION: do u make this undertail exhaust for the 05's and 06's zx10's? |
| ANSWER: sorry but Hotbodies does not make the exhaust for that bike. |
|
| QUESTION: i got this exhaust on my bike right now and i have no power commander, if i leave my bike like this eventually will my bike start to lose power or will i have problems with my bike? |
| ANSWER: no you will not have any problems if you dont have a power commander. |
|
| QUESTION: I ordered this exhaust from you guys and it's on it's way Fed-Ex for my brother's B-day...I just found out that he already purchased the same one on E-bay and already installed it a week ago. Once I recevive it can I just return it and get my card refunded the $188.00 ? |
| ANSWER: Please refuse the package - However, we will need to charge a re-stocking fee. Email or call us directly with your order number and name. Thanks, Marnee |
|
| QUESTION: have you got any thing sorted for the k7 1000 gsxr look forword to seeing some great exhaust from your side of the warter all the best tim |
| ANSWER: the 07 GSXR1000 is in the works right now. Check back April 07. |
|
| QUESTION: does this exhaust have packing in it or is it just baffle? |
| ANSWER: It has a baffle built in.
|
|
| QUESTION: Do you currently have the Suzuki GSX-R 1000 (05-06) Slash Cut Megaphone Side Mount Exhaust in stock ready to ship? |
| ANSWER: In stock ready to ship. |
|
| QUESTION: How long does it take to receive a slash cut exhaust from where you are to Miami Florida? |
| ANSWER: about 5 business days |
|
| QUESTION: how much would it cost to ship to nsw australia |
| ANSWER: approx $100 |
|
| QUESTION: do i lose any back pressure when i install the exhaust. |
| ANSWER: No because this kit still have a baffle system so it should be fine.
|
|
| QUESTION: Is there a Powercommander map for the Slash Cut Megaphone Side Mount Exhaust available fitted on a Suzuki GSXR1000 K5? |
| ANSWER: There is no map for the Power commander but if you want one we recommend you have the bike put on a dyno that way they can program the pc3 for your bike and the exhaust. |
|
| QUESTION: what about the f.i. light after u put the exhaust on? how do u get rid of that after putting on the exhaust. and should u put a power commander after putting it on |
ANSWER: here's how to get rid of the FI light
1) Find the Grey plug on the ECU
2) Under the "orange cap" there is a BLACK and BROWN wire, the 8th wire in...unplug it
Thanks
|
|
| QUESTION: does this exhaust have to have an exhaust valve like on the stock one? And is there a way to make it a little more quiet? |
| ANSWER: On this exhaust, you remove the butterfly valve. The kit already has the baffle built in for noise reduction. |
|
| QUESTION: the hotbodies exhaust do u have to bypass the catalytic converter on the stock exhaust |
| ANSWER: You will have to bypass the butterfly valve on the exhaust kit. |
|
| QUESTION: How does the exhaust sound at idle compaired to the stock. Does it carry a deeper tone? |
| ANSWER: At idle it will have a deeper tone than stock. |
|
| QUESTION: is this exhaust loud? and does it sacrifice power |
| ANSWER: The exhaust on top end does get pretty loud, but sounds very aggressive. The bike does not lose power. |
|
| QUESTION: Do you have any pic's/cost of the undertail system for gsxr K5 1000 yet also does the slash cut fit straight on without losing the exup and do you ship to the UK cheers |
| ANSWER: We only carry the megaphone exhaust for this bike, we do not offer an undertail exhaust. It fits on to the end of the pipe and does not affect the EXUP valve assembly. We ship to the UK, shipping costs are determined by the size and weight of the package and cannot be estimated until time of shipment, when it is added as a second charge to the credit card used for the primary transaction.
|
|
| QUESTION: will you be making this same kind of undertail exhaust kit for the 06-07 ZX 10"s ? |
| ANSWER: We won't know until about Jan-Feb of 07. Check back then. Thanks |
|
| QUESTION: will these undertail exhaust fit the 06 Gsxr1000
models |
| ANSWER: Check back first part of August. |
|
| QUESTION: 05 gsxr 1000, do u have the undertail exhaust?...
In the Q&A's above you stated 2-3 months, but i don't know when those were posted.....as of today (3/14/05); what are we looking at for a time frame? |
| ANSWER: we are still working on that part. i honestly have no eta on when it will be completed. |
|
| QUESTION: got a pic? available now??!! |
| ANSWER: This product is still going through some final production. |
|
| QUESTION: I would like to know the status of The Undertail Exhaust on the '05 GSXR 1000. How long before finished product hit the market, do you have any pictures, price? |
| ANSWER: We are still in production and going through some final testing. It will be anther 2-3 months, because it will fit perfectly and produce improved performance as well as improved appearance. |
|
| QUESTION: Hey there... i was wondering whether you can send your undertail systems to Australia. i tried asking hotbodies and they told me email you on the matter. thanks for your help..
Cheers, Alan |
| ANSWER: Alan yes we do ship to Australia. Hot bodies will send the item to us and we send it from our home office. You will be charged for shipping and insurance which usually runs around $80.00 US.
Thanks David |
|
| QUESTION: Hi again, do you have a pictue now? And does the the offer include free shipping to Sweden as well? |
| ANSWER: No pictures yet, they won't be available until late this year. We do not ship internationally.
|
|
| QUESTION: I would like to know the status of the Undertail Exhaust for the '05 GSXR 1000. How long before finished, pictures, price, sound? |
| ANSWER: Hotbodies is still working on this item - should be done within the next 2-3 months. |
|
| QUESTION: When in April will the undertail exhaust be available |
| ANSWER: we are still working on this exhaust kit right now it looks like it will be sometime in End or even first part of June. |
|
| QUESTION: do you have a picture of the 05 gsxr 1000 with the undertail exhaust |
| ANSWER: Hotbodies still hasen't finished this part - they are waiting to get the bike in the shop to start it.
|
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Schdeule
powered by WordPress e-commerce company