|
| CryO2 Cryogenic Air Intake 3'' O.D. |
The CryO² Air Intake segments mount right in the airstream using silicone sleeves. The CryO² Air Intake consists of an aerodynamically designed bulb with a cryogenic chamber which is mounted in a 4" segment of air tube. The air passes over the bulb, heat is removed from the air charge resulting in a colder, denser, more powerful charge. Dyno testing showed a reduction in intake air temperature of more than 50 degrees. The CryO² Air Intake can be used on turbocharged, supercharged or naturally aspirated applications. Multiple units can be used for colder results. Installs in minutes and comes with silicone connection sleeve, hose clamps and connection / vent hose.
|
| |
| This item usually takes about 7 days to ship |
| |
| Item no. 80110 |
Retail: $156.00 (PLUS shipping) |
| Today's Sale Price: $156.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DEI Cryogenic Air Intakes™ FAQ
What does the CryO2™ Air Intake do?
It cools the in coming air into the motor. A cooler more dense intake charge will result in more horsepower and torque. This item works very well for turbocharged or supercharged applications.
Where do I put the CryO2™ Air Intake segment?
You put it inline with the intake filter and throttle body. On turbo or supercharged applications, you can position the intake segment to be before or after the turbo, or both at the same time! The kit has the hose clamps to meet up with your existing intake setup.
How do I know what size to get?
Take a measuring tape to your current intake and measure the outside diameter of the tube. That measurement will specify which version of the CryO2 Air Intake you will need, it should be pretty close to 2.5” (PN # 80111) or 3.0” (PN # 80110)
Can I use this in conjunction with Nitrous or with Forced Air Induction?
Absolutely! When used with nitrous, turbocharger or supercharger will usually see even more gain usually.
What if my intake is special and I just need the bulb?
Don’t fear! Part Number # 080119 is just the intake bulb and legs. You can have the aluminum legs TIG welded to whatever custom intake setup you have.
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: Im in thailand and interesting in your product to distribute them in thailand ,SO can i please have information as much as you could provide,and i have ability to distribute them ,sorry if there are any mistake of my english . Thank you and lookin forward for your reply Rachain Lertplakorn
|
| ANSWER: What kind of information do you need? You can sign up for our delaer program at www.1tail.com/sa/dealer. |
|
| QUESTION: Can it be installed in a 07 Nissian Maxima Se? Also what type of performance improvement will I gain. |
| ANSWER: With the proper modifications to the intake manifold, this unit can be installed in any vehicle - note specification above: [....aerodynamically designed bulb with a cryogenic chamber, mounted in a 4" segment of air tube.....] You will experience a power increase exactly equal to what you would experience if you were to operate your car at a temperature 50 degrees Fahrenheit colder. The engine will make significantly more horsepower, and the longer life of all your turbocharger/supercharger components will more than pay for the system in the long run. |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Schdeule
powered by