|
| Brembo - Clutch 13mm Black - Square Reservoir 900SS Type |
Square reservoir style master cylinder commonly used on Ducati models from the 90's. Typically used on the Ducati 900ss, 851, Monster.
On the models with Dual Front brake calipers, Ducati increased the master cylinder diameter for the front brake from 15mm to 16mm for better lever firmness and feel. When upgrading from a single to a dual disc set up on a Ducati 750, we suggest upgrading to the proper diameter master cylinder.
For single caliper front brakes, master cylinder diameter has been standardized at 13mm. Clutch master cylinder diameter has been standardized at 13mm. |
| |
| Item no.10.4670.14 |
| Today$99.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| On the models with Dual Front brake calipers, Ducati increased the master cylinder diameter for the front brake from 15mm to 16mm for better lever firmness and feel. When upgrading from a single to a dual disc set up on a Ducati 750, we suggest upgrading to the proper diameter master cylinder.
For single caliper front brakes, master cylinder diameter has been standardized at 13mm.
Clutch master cylinder diameter has been standardized at 13mm. |
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: Hi,my clutch master cylinder is a 10. 5058 on a 1995 900SS. Is this the same item? |
| ANSWER: We dont have a part number 10.5058 is there anymore numbers? |
|
| QUESTION: I have a 2003 Ducati Monster 800 SIE with a clutch m/cylinder which has numbers 10.4668 and 2J09 13 on it.Do you have a rebuild kit for this yet? Thank tou. |
| ANSWER: I don't have tehm in stock but they should arrive in the next 2 weeks.
Thanks! |
|
| QUESTION: 1977-900ss.How do you get the pistons out of the master cylinders.Front has number 10 2729.00 Rear is 10 2926.00.all I can see is a metal ring in there,no circlip,thank,s John. |
| ANSWER: So nothing gets damaged I suggest taking it to a local shop. |
|
| QUESTION: I have a 2003 Ducati Monster 800 SIE with a clutch m/cylinder which has numbers 10.4668 and 2J09 13 on it.Will your product replace my m/cyl or do you have a rebuild kit for mine?
Thanks. |
| ANSWER: The rebuild kit is on back order for about two more weeks.
I have the master cylinder in stock.
Thank You! |
|
| QUESTION: Do you have kits for Brembo 10.6939 2 Clutch master cylinder
Ducati pt no. 630.4.004.1D
or new Cylinder
Plus post to Australia
Regards norm |
| ANSWER: The part numbers you gave are not familiar to me. I don't have any Ducati part numbers. However part number at the top of 10.4670.14 does have a repair kit but I am out of it at the moment. The kit number is 110.4362.50. I expect more in the next few months.
Thanks,
Jolene |
|
| QUESTION: Jolene,
Thank you for the reply. When do you expect to be back in stock?
Jeff
|
| ANSWER: I expect them in the next 3-4 weeks. |
|
| QUESTION: Hi, Am hunting for a seal kit for the front master cylinder on a 2000 ST4 Ducati. Is this something I could order thru you? |
| ANSWER: Part number is 110.4362.50 at $18.27 for the kit. I am currently out of stock.
Jolene |
|
| QUESTION: hello, this looks like the stock clutch master cylinder on my '98 ducati ST2. will it work on my bike, or do you have a rebuild kit for my bike? thanks! |
| ANSWER: Yes, that should work for your '98 ST2 Ducati. There is also a rebuild kit for that master cylinder if that's what you are needing. The Brembo part number for the rebuild kit for this master cylinder is 110.4362.50. |
|
| QUESTION: Will this fit my Moto Guzzi handlebars (7/8")? Does it match your 10.4620.86 brake master cylinder? Would that brake m/c be an appropriate size for a pair of F08 calipers, or is a 15 better?
Thanks.
Bob Gale
Whittier, CA |
| ANSWER: Yes, it will fit your handlebars and is a match to the 10.4620.86 Brake. As for the brake, yes the size is fine.
Thank You! |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Schdeule
powered by WordPress e-commerce company