The CFM 3 piece brake pedals feature a hard anodized/Teflon coated pivot for smooth, long lasting operation. The pivot is extremely tough and will rarely break in the event of a crash. The main replacement shaft and lever tip are both individually replaceable and are far less expensive than an OEM pedal. These trademark CFM pieces are not only economical, but are also very easy to replace-saving time during a quick repair. However, you may not even need to replace them as we have seen our main shafts bent to nearly 90 degrees and back several times before breaking……try THAT with your OEM pedal!!

This pedal will fit on OEM rearset brackets, but does not have provisions for pedal return springs or brake light switches.

The CFM 3 piece shift pedals feature a hard anodized/Teflon coated pivot for smooth, long lasting operation. The pivot is extremely tough and will rarely break in the event of a crash. The main replacement shaft and lever tip are both individually replaceable and are far less expensive than an OEM pedal. These trademark CFM pieces are not only economical, but are also very easy to replace-saving time during a quick repair. However, you may not even need to replace them as we have seen our main shafts bent to nearly 90 degrees and back several times before breaking……try THAT with your OEM pedal!!
Not actual pedal in photo

The CFM 3 piece shift pedals feature a hard anodized/Teflon coated pivot for smooth, long lasting operation. The pivot is extremely tough and will rarely break in the event of a crash. The main replacement shaft and lever tip are both individually replaceable and are far less expensive than an OEM pedal. These trademark CFM pieces are not only economical, but are also very easy to replace-saving time during a quick repair. However, you may not even need to replace them as we have seen our main shafts bent to nearly 90 degrees and back several times before breaking……try THAT with your OEM pedal!!

The CFM 3 piece shift pedals feature a hard anodized/Teflon coated pivot for smooth, long lasting operation. The pivot is extremely tough and will rarely break in the event of a crash. The main replacement shaft and lever tip are both individually replaceable. Comes complete with adjustable eccentric toe peg.

The CFM 3 piece shift pedals feature a hard anodized/Teflon coated pivot for smooth, long lasting operation. The pivot is extremely tough and will rarely break in the event of a crash. The main replacement shaft and lever tip are both individually replaceable and are far less expensive than an OEM pedal. These trademark CFM pieces are not only economical, but are also very easy to replace-saving time during a quick repair. However, you may not even need to replace them as we have seen our main shafts bent to nearly 90 degrees and back several times before breaking……try THAT with your OEM pedal!!
Not actual pedal in photo

The CFM 3 piece shift pedals feature a hard anodized/Teflon coated pivot for smooth, long lasting operation. The pivot is extremely tough and will rarely break in the event of a crash. The main replacement shaft and lever tip are both individually replaceable and are far less expensive than an OEM pedal. These trademark CFM pieces are not only economical, but are also very easy to replace-saving time during a quick repair. However, you may not even need to replace them as we have seen our main shafts bent to nearly 90 degrees and back several times before breaking……try THAT with your OEM pedal!!

The CFM 3 piece shift pedals feature a hard anodized/Teflon coated pivot for smooth, long lasting operation. The pivot is extremely tough and will rarely break in the event of a crash. The main replacement shaft and lever tip are both individually replaceable and are far less expensive than an OEM pedal. These trademark CFM pieces are not only economical, but are also very easy to replace-saving time during a quick repair. However, you may not even need to replace them as we have seen our main shafts bent to nearly 90 degrees and back several times before breaking……try THAT with your OEM pedal!!

Fits most Woodcraft levers

The universal replacement shaft connects the main pivot to the toe piece of the pedal and is replaceable by simply removing the bolts on the shaft (does not require footpeg removal). These shafts are made of 6061 T6 Aluminum and are not only much stronger than OEM pedals but they can also much less likely to break if bent and then straightened.

The CFM 3 piece shift pedals feature a hard anodized/Teflon coated pivot for smooth, long lasting operation. The pivot is extremely tough and will rarely break in the event of a crash. The main replacement shaft and lever tip are both individually replaceable and are far less expensive than an OEM pedal. These trademark CFM pieces are not only economical, but are also very easy to replace-saving time during a quick repair. However, you may not even need to replace them as we have seen our main shafts bent to nearly 90 degrees and back several times before breaking……try THAT with your OEM pedal!!
This pedal will work on either CFM (woodcraft) or OEM rearsets

Comes with 05-0425 Rearset Kit and 05-0425B Rearset Kit w/pedals. Replacement part only. Purchase 08-0427 GP Conversion kit with 05-0425 or 05-0425B to switch to GP shift.

CFM/Woodcraft rear sets purchased in 2004/05 # 05-0425 already have the correct shift rod and only need the converter.

Note:If converting stock OEM rear sets from standard shift to GP shift you will also need to purchase 07-0425 GP shift rod.