 |
| -TiteLite- Auto License Plate Light Kit - Domed Head Satin Finish Item #: 030301 |
$33.98
|
TiteLite License Plate Light kits feature a right-angle LED for direct illumination of your license plate. Super bright LEDs are extemely efficient and emit a higher degree of light in a desired location than incandescent lamps. Since there is no filament that can be damaged, LEDs are incredibly durable - virtually shock and vibration-proof!
The clear epoxy covered lens offers waterproof protection.
Temperature resistant
Low power consumption
Low heat output
No damaging UV emissions
Kit contains 2 lights for the top and two bolts for the bottom.
 |
|
 |
| -TiteLite- Lighted Buttonhead Bolts Item #: 03030x |
$9.67
|
Polished, hex head button head bolts with a 12 volt colored bulb installed to shine though the hex head. Sold individually. 5/16" x 3/4"
Note: Only one left in Red. |
|
 |
| -TiteLite- Motorcycle License Plate Lights - Acorn Head Polished Finish (pair) Item #: 030311 |
$32.98
|
TiteLite License Plate Light kits feature a right-angle LED for direct illumination of your license plate. Super bright LEDs are extemely efficient and emit a higher degree of light in a desired location than incandescent lamps. Since there is no filament that can be damaged, LEDs are incredibly durable - virtually shock and vibration-proof!
The clear epoxy covered lens offers waterproof protection.
Temperature resistant
Low power consumption
Low heat output
No damaging UV emissions
Thread pitch 5/16" x 18
|
|
 |
| -TiteLite- Motorcycle License Plate Lights - Domed Head Satin Finish (pair) Item #: 030302 |
$23.98
|
TiteLite License Plate Light kits feature a right-angle LED for direct illumination of your license plate. Super bright LEDs are extremely efficient and emit a higher degree of light in a desired location than incandescent lamps. Since there is no filament that can be damaged, LEDs are incredibly durable - virtually shock and vibration-proof!
The clear epoxy covered lens offers waterproof protection.
Temperature resistant
Low power consumption
Low heat output
No damaging UV emissions
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
| Custom Tag Bracket - ''Hinge Style'' For Undertail Anodized Black Item #: A3024 |
$52.65
|
This custom tag bracket gives you the flexibility to mount anywhere you want underneath your existing undertail. Several holes have already been pre drilled allowing you to find that right spot. They fit any license plate with mounting holes about 5.67" apart & can easily be adapted to fit others. |
|
 |
| ECLIPSE SECURITY BLACKOUT LICENSE FRAME KIT Item #: 22-153 |
$181.98
|
Designed and intended for show bikes and display purposes only. The Eclipse License Plate Frame has a clear glass panel that goes dark with the flip of a dash or fairing, mounted switch. A red LED light indicates when The Eclipse is dark, so you wont accidentally ride off with the license plate obscured. 12v powered - includes wiring, fuse, switch, LED, controller and instructions. The Eclipse is not legal for street or public road use.
Item Currently On Backorder |
|
 |
| KAWASAKI ZX-14 (06-07) PEG MOUNT LICENSE PLATE BRACKET (TRIPLE CHROME) Item #: CA3063 |
$212.84
|
CUSTOM TRIPLE CHROME BILLET ALUMINUM LICENSE PLATE BRACKET FOR THE KAWASAKI ZX-14 (06-07). HAS "ZX-14" ENGRAVED ON TOP SIDE. RELOCATES YOUR TAG TO THE LEFT REAR PASSENGER PEG MOUNT., NO HARDWARE SHOWING ON THE PLATE SIDE! THIS IS A MUST HAVE FOR THE STRETCHED BIKE ENTHUSIAST AND CAN BE USED ON BIKES WITH SINGLE OR DUAL EXHAUSTS... |
|
|
| LICENSE PLATE BRACKET Item #: RU36480 |
$22.88
|
Universal fit for most models - fits all Rumble Undertail kits
Made from Stainless Steel
Drill two holes to mount
|
|
 |
|
 |
| Targa Led Turn / Signal License Mount Assy - Red Item #: 07-600R |
$60.57
|
Install these super bright LEDs on your license plate bracket for use as marker or signal lights. Simple installation by placing the stamped bracket between your license plate and the bracket, wire to your existing signal wires and youre ready to go. 12v - 2 wire. |
|
 |
| Targa Led Turn / Signal License Mount Assy - Amber Item #: 07-600A |
$60.57
|
Install these super bright LEDs on your license plate bracket for use as marker or signal lights. Simple installation by placing the stamped bracket between your license plate and the bracket, wire to your existing signal wires and youre ready to go. 12v - 2 wire. |
|
|
|
 |
| TARGA INCANDESCENT LICENSE LIGHT - WHITE Item #: 07-4080W |
$38.06
|
INCANDESCENT LICENSE LAMP-POLISHED ALUMINUM HOUSING
This bright light is enclosed in a machined aluminum housing with a 6mm threaded stud allowing it to be mounted to the license plate hole with no drilling. It will light a license plate no matter where the plate is mounted. (Stock location or undertail, rear axle mount or any custom location). We recommend it for use with the Titebike axle mount relocation kit. Sold individually.
Size is 5/8 diameter x 1-3/4 long.
Not DOT approved.
Fits: ALL BIKES |
|
 |
| TARGA LED LICENSE BOLT SET Item #: 07-4012BR |
$32.19
|
Mount your license plate with these really bright LED License Plate Lights and get additional visability. Can be wired to turn, stop or running lights as desired. With the small 6mm diameter mounting stud, they may be installed easily to any part of the bike with a small 1/2" dia. hole. Sold in pairs. (not DOT approved)12 v/ red lamp. |
|
 |
| TARGA LED LICENSE LIGHT - WHITE Item #: 07-5157W |
$37.35
|
LICENSE PLATE LIGHT-MACHINED ALUMINUM HOUSING-WHITE LED
These Bright White LED lights are housed in a super small machined aluminum body, only 3/10 x 7/10 in size. The LED light is installed at a 90 angle making for an ideal mount on either the undertail or license plate. Requires a 5/16 hole for mounting. Sold individually. Not DOT approved.
Fits: ALL BIKES |
|
 |
| TARGA LICENSE LIGHT WHITE LED Item #: 07-4072W |
$36.06
|
For use on Undertails, the LED License Plate Lights are only 5/8diameter and 5/8 high with a white LED bulb. Installation will require drilling a single 5/16 diameter hole. 12v - 2 wire. Sold individually.
|
|
|
|
|
|
 |
|
 |
| TRIPLE CHROMED FOOTPEG MOUNT LICENSE PLATE BRACKET Item #: CA3065 |
$212.84
|
TRIPLE CHROMED BILLET ALUMINUM LICENSE PLATE BRACKET FOR KAWASAKI & SUZUKI. RELOCATES YOUR TAG TO THE LEFT REAR PASSENGER PEG MOUNT. NO HARDWARE SHOWING ON THE PLATE SIDE! THIS IS A MUST HAVE FOR THE STRETCHED BIKE ENTHUSIAST AND CAN BE USED ON BIKES WITH SINGLE OR DUAL EXHAUSTS...
FITS THE FOLLOWING MODELS:
GSXR 600 (01-05)
GSXR 750 (00-05)
GSXR 1000 (01-04)
HAYABUSA (ALL)
ZX14 (06-07) |
|
|
|
|
|
 |
|
 |
|
 |
| TRIPLE CHROMED STANDARD UNIVERSAL ALUMINUM TAG BRACKET Item #: CYS2549051 |
$144.47
|
This tag bracket mounts to your stock swingarm and is made of 100% billet aluminum.
FITS THE FOLLOWING MODELS:
VMAX (ALL YEARS)
CBR 600 F4/F4i (99-06)
CBR 600RR (03-04),
SUZUKI OIL COOLED (88-92) |
|
|
|
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
| Yana Shiki KAWASAKI ZX-14 (06-07) PEG MOUNT LICENSE PLATE BRACKET (POLISHED) Item #: A3063 |
$143.19
|
CUSTOM POLISHED BILLET ALUMINUM LICENSE PLATE BRACKET FOR THE KAWASAKI ZX-14 (06-07). HAS "ZX-14" ENGRAVED ON TOP SIDE. RELOCATES YOUR TAG TO THE LEFT REAR PASSENGER PEG MOUNT., NO HARDWARE SHOWING ON THE PLATE SIDE! THIS IS A MUST HAVE FOR THE STRETCHED BIKE ENTHUSIAST AND CAN BE USED ON BIKES WITH SINGLE OR DUAL EXHAUSTS... |
|
 |
|
 |
|
 |
| Yana Shiki STANDARD UNIVERSAL BLACK TAG BRACKET Item #: YS2549052 |
$103.20
|
This tag bracket mounts to your stock swingarm and is made of 100% billet aluminum powder coated black.
FITS THE FOLLOWING MODELS:
VMAX (ALL YEARS)
CBR 600 F4/F4i (99-06)
CBR 600RR (03-04)
SUZUKI OIL COOLED (88-92) |
|
 |
|
 |
|
 |
|
|
| Yana Shiki SUZUKI PEG MOUNT LICENSE PLATE BRACKET (POLISHED) Item #: A3065 |
$143.19
|
CUSTOM POLISHED BILLET ALUMINUM LICENSE PLATE BRACKET FOR THE SUZUKI. It HAS "GSXR" ENGRAVED ON TOP SIDE. RELOCATES YOUR TAG TO THE LEFT REAR PASSENGER PEG MOUNT. NO HARDWARE SHOWING ON THE PLATE SIDE! THIS IS A MUST HAVE FOR THE STRETCHED BIKE ENTHUSIAST AND CAN BE USED ON BIKES WITH SINGLE OR DUAL EXHAUSTS...
FITS THE FOLLOWING MODELS:
GSXR 600 (01-05)
GSXR 750 (00-05)
GSXR 1000 (01-04)
HAYABUSA (ALL) |
|
 |
| Yana Shiki SUZUKI/KAWASAKI PEG MOUNT LICENSE PLATE BRACKET (ANODIZED BLACK) Item #: A3065AB |
$156.09
|
CUSTOM ANODIZED BLACK BILLET ALUMINUM LICENSE PLATE BRACKET FOR THE SUZUKI. It HAS "GSXR" ENGRAVED ON TOP SIDE. RELOCATES YOUR TAG TO THE LEFT REAR PASSENGER PEG MOUNT. NO HARDWARE SHOWING ON THE PLATE SIDE! THIS IS A MUST HAVE FOR THE STRETCHED BIKE ENTHUSIAST AND CAN BE USED ON BIKES WITH SINGLE OR DUAL EXHAUSTS...
FITS THE FOLLOWING MODELS:
GSXR 600 (01-05)
GSXR 750 (00-05)
GSXR 1000 (01-04)
HAYABUSA (ALL - Including new 2008 Model)
KAW ZX14 (06-07) |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
Event Schdeule
powered by 